If you’re having trouble using your laptop touchpad, there may be a few things you can do to fix it. Here are some tips to help you fix a laptop touchpad that won’t work:
- Check the touchpad’s calibration. If the touchpad is off-center or has other issues, it may need to be calibrated. This can be done by going to the device’s settings and selecting " calibration." Once calibrated, try using the touchpad again.
- Clean the touchpad. If the pad is covered in dust or dirt, it may need to be cleaned. This can be done by using a vacuum cleaner or a brush with soft bristles. Be sure not to damage the pad in any way!
- Check for dead batteries. If your laptop has dead batteries, they may need to be replaced. This can be done by going into the device’s battery compartment and removing two of the battery cells (there are usually four cells in each battery compartment). Replace them with new ones if necessary.
The Touchpad Was Disabled With the Function Key
Most, if not all, Windows laptops dedicate one of the function keys to disabling and enabling the laptop touchpad. The icon on the key often depicts an older-style touchpad with a line through it.
Press and hold the Function key (usually labeled as “fn”) and press the touchpad disable/enable key in the row of function keys. Its location and appearance will differ depending on your laptop’s make and model, but the key will likely look like a touchpad with a line going through it.
You should see a message on the screen telling you that the touchpad is enabled or disabled. If the message says enabled, check the touchpad to see if it is now working.
The Touchpad Has Been Disabled in Settings
Both Windows and macOS allow you to disable the touchpad in the settings. If anyone else uses the laptop, the touchpad could have been disabled in this way.
In Windows, open Settings > Bluetooth & Devices > Touchpad. Check that the touchpad has not been disabled here.
On a MacBook, click the Apple menu and go to System Preferences > Accessibility > Pointer Control > Mouse & Trackpad. There isn’t a simple on/off switch for the trackpad here, but there is an option to “Disable the Trackpad If an External Mouse Is Connected.” Check that this option is not selected.
RELATED: How to Disable Your Mac’s Touchpad When Another Mouse Is Connected
Enabling Another Device Has Disabled the Touchpad
As detailed above, your MacBook can be set to automatically disable the trackpad when an external mouse is connected. Windows has a similar setting to disable the laptop touchpad when a mouse is connected.
In Windows, open Settings > Bluetooth & Devices > Touchpad. Click the Touchpad section to expand it, and then check the box next to “Leave Touchpad on When a Mouse Is Connected.”
Switching to Tablet Mode Has Disabled the Touchpad
Switching to tablet mode on a Windows touchscreen laptop can disable the touchpad. This helps to prevent unwanted input from the touchpad when using the touchscreen.
In Windows 11, tablet mode is automatically enabled when you fold a 2-in-1 laptop into the tablet form. It will also be enabled if you remove a detachable keyboard. Obviously, if you have removed the keyboard, you won’t be trying to use the touchpad.
Windows 10 doesn’t have this automatic function. Instead, touchscreen laptops can be switched to tablet mode from the “Quick Settings” panel in the Action Center. Open the Action Center by clicking the icon (a chat bubble) in the taskbar, or by pressing Windows+A, and make sure tablet mode is turned off.
Your Laptop Needs to Be Rebooted
It’s a tired question, but it still has to be asked: have you tried turning it off and on again? If your laptop is always left on or in sleep mode, rebooting it could fix the problem. Power down the laptop and wait for 30 seconds to allow any residual energy to discharge. Boot the laptop up and check if the touchpad is working.
If this does fix the problem, it could still be a sign that there is some sort of software problem. Take a few minutes to check for and install any available system updates, as we explain below.
Updating Device Drivers Has Caused a Conflict
Regularly updating drivers is, of course, recommended to keep your laptop working well. Unfortunately, because PC configurations are not standardized, it is almost impossible to avoid some driver conflicts.
A driver conflict means that the installed software update unexpectedly affects how another piece of software functions. If your touchpad has stopped working shortly after updating any drivers, a driver conflict could be the problem.
In Windows, you can roll back driver updates in Device Manager. Open Device Manager and find the device that had its driver updated. Right-click and select “Properties.” Open the “Drivers” tab in the properties pane, and click the “Roll Back Driver” button.
If you are using macOS, you can’t roll back driver updates as you can in Windows. But if you have a recent Time Machine backup, you could restore it back to before the driver was updated.
The Touchpad Has Been Disabled in the BIOS
A laptop’s touchpad can be disabled in the BIOS settings. Very occasionally, flashing or updating the BIOS can cause the touchpad setting to be changed. You can check by booting into the BIOS settings.
Power on your laptop and tap the key used to boot into BIOS. The key you need to press varies between device manufacturers but is usually F2, F10, or F12. In the “Advanced” BIOS settings, look for “Touchpad” or “Internal Pointing Device”, and make sure it has not been disabled. Make sure to save any changes before you exit the BIOS settings.
RELATED: How to Enter the BIOS on Your Windows 11 PC
Your Touchpad or Hands Are Dirty
Unless you have a very old laptop, the touchpad is likely to be capacitive. That means it works by detecting tiny electrical charges from your fingertips when you touch it. Dirt, particularly grease, on the touchpad surface or on your fingers can prevent the capacitive surface from detecting input.
Clean a dirty touchpad carefully using laptop cleaning wipes or isopropyl alcohol on a soft cloth. This is best done with the laptop turned off and unplugged. Isopropyl alcohol will not damage electrical components, but other types of cleaning fluid might. Let the touchpad dry before powering on the laptop.
System Updates Need to Be Installed
Both Microsoft and Apple release regular updates to the system software. System updates improve security, fix known issues, and generally help to keep your computer running smoothly. They can solve any number of problems, including the sort of software conflicts that could stop a touchpad from working.
In Windows, open Settings > Updates & security > Windows Update. Click the “Check for Updates” button, and then download and install any that are available.
On a MacBook, click the Apple menu > System Preferences > Software Update. Look for all available updates and click the “Update Now” button to install them.
If All Else Fails, Use a Mouse
If all of the steps above fail to fix the problem with the touchpad, it could be a hardware problem. Consult your laptop’s manufacturer to see if it’s still under warranty. It may also be possible to repair or replace your touchpad yourself, though you should be warned we don’t recommend DIY tech repairs in every case.
You can, of course, use a mouse instead of a touchpad. There are lots of good Bluetooth mice available, but a wired USB mouse will also work just as well if the cable doesn’t bother you.
