Apple’s Macs are known for their reliability, but sometimes they don’t work as expected. Here are some tips to help fix a Mac that won’t turn on:
- Check the power cord. Make sure the power cord is properly plugged in and that it’s not damaged.
- Check the computer system. Make sure all of the components are working properly and that no viruses or malware are present.
- Reset the computer system. Resetting the computer system can fix many problems, including problems with the power cord and computer system.
The first steps here assume your Mac just isn’t responding when you press its power button. If it’s responding but failing to boot up normally, scroll down to the Recovery Mode sections.
Ensure It Has Power
Ensure your Mac is plugged into a power source. Try swapping out the charger or power cable, or using a different power outlet. The charger itself may be damaged. If you’re using a MacBook and its battery is completely dead, you may need to wait a few moments after plugging it in before turning it on. It won’t necessarily boot immediately the moment after you plug it in.
Check the Hardware
Assuming you’re using a Mac desktop, check that all its cables are correctly seated. For example, if it’s a Mac Mini, ensure the video-out cable is connected securely to both the Mac Mini itself and the display. Try reseating all the cables—unplug them and then plug them back in—to ensure they’re securely connected.
If you’ve recently opened up your Mac and fiddled with its hardware, that could have caused the problem. For example, if you installed RAM or swapped out a hard drive, you may want to try swapping back in the old hardware or just ensuring those components are securely seated in your Mac.
If all else fails, try unplugging all unnecessary peripherals before trying to boot your Mac.
Perform a Power-Cycle
If your Mac is stuck in a frozen state and not responding to power button presses, you can fix it by cutting the power to it and forcing it to restart.
On a modern MacBook without a removable battery, press the Power button and hold it down for ten seconds. If your Mac is running, this will forcibly cut the power to it and force it to restart.
With Mac desktops (iMac, Mac Mini, or Mac Pro), unplug the power cable, leave it unplugged for ten seconds, and then plug it back in.
Finally, if you have an older Mac with a removable battery, shut it down, unplug it, remove the battery, wait ten seconds, and then reinsert it.
RELATED: How to Power Cycle Your Gadgets To Fix Freezes and Other Problems
Reset the System Management Controller Firmware
In some cases, you may need to reset the system management controller (SMC) firmware on your Mac. This is the last thing you should try if your Mac isn’t responding to power button presses at all.
On current MacBooks without a removable battery, plug in the power cable. Press the Shift+Control+Option keys at the left side of the keyboard and the Power button, and hold them all down. Release all four buttons at the same time, and then press the Power button to turn the Mac on.
Mac desktops don’t have batteries, so unplug the Mac’s power cord and leave it unplugged for fifteen seconds. Plug it back in, wait five more seconds, and then press the Power button to turn the Mac back on.
With older MacBooks with a removable battery, unplug the Mac from its power source and remove the battery. Press the Power button and hold it down for five seconds. Release the Power button, reinsert the battery, plug in the Mac, and press the Power button to turn it back on.
Use Disk Utility From Recovery Mode
Assuming your Mac is actually booting up but macOS isn’t loading properly, there’s likely a software problem. Your Mac’s disks may be corrupted, and you can fix this from recovery mode.
To access recovery mode, boot your Mac up. Press and hold the Command + R keys during the boot-up process. You should try to press these immediately after you hear the chime sound. Your Mac should boot to recovery mode. If it doesn’t, you probably didn’t press the keys soon enough—restart your Mac and try again.
Click the “Disk Utility” option, click over to the First Aid tab, and try repairing your Mac’s disk. The Disk Utility performs an “fsck” (file system check) operation, so you don’t need to run the fsck command manually.
RELATED: 8 Mac System Features You Can Access in Recovery Mode
Restore From Recovery Mode
If the Disk Utility didn’t work, you can reinstall macOS on your Mac.
Use the “Reinstall macOS” option in Recovery Mode to have your Mac automatically download the latest macOS installation files and reinstall its operating system. You can also restore from a Time Machine backup. If your Mac operating system is damaged, this will replace the damaged software with a fresh, undamaged operating system.
RELATED: How to Wipe Your Mac and Reinstall macOS from Scratch
If nothing here worked—if your Mac just won’t turn on at all no matter how many times you press its Power button, if recovery mode isn’t functional, or if macOS doesn’t load properly even after you reinstall it from Recovery Mode—your Mac likely has a hardware problem.
Assuming it’s under warranty, you should contact Apple or take it to a local Apple Store to have them fix the problem for you. Even if you don’t have a warranty, you may want to take it to an Apple Store or another place Apple computers are repaired and have them attempt to fix it.
RELATED: So Your Mac Isn’t Getting macOS Updates, Now What?
