If you’re like most people, you probably have a 4-digit PIN code to unlock your Ecobee thermostat. But if you don’t, there’s a good chance that someone has broken into your home and stolen your thermostat. If this happens, you need to lock your Ecobee thermostat with a 4-digit PIN code so that no one can get it back. To lock your Ecobee thermostat with a 4-digit PIN code, follow these steps:

  1. Open the Ecobee thermostat’s main screen and enter the four digits of your PIN code into the “PIN Code” field. The “PIN Code” will appear as a green check mark in the main screen.
  2. Click on the “lock” button in the top right corner of the main screen. The “lock” button will turn blue and stay blue until you press it again or until someone deletes or changes their PIN code for theEcobee thermostat.
  3. If someone deletes or changes their PIN code for theEcobee thermostat, you’ll need to re-enter their new PIN code in order to unlock your Ecobee thermostat again.

If you have kids in the house and are strict about the thermostat, you can lock down your Ecobee with a PIN code so that no one can adjust the temperature except those authorized to do so.

RELATED: How to Install and Set Up the Ecobee Smart Thermostat

With a non-smart thermostat, you’d usually have to get a locked enclosure to put around it, like you see in most businesses. But with smart thermostats like the Ecobee, you can simply put a passcode lock on it just like you would with your smartphone.

Unfortunately, you can only set this up from the thermostat itself and not from the Ecobee app on your phone (like the Nest allows you to do), but it’s easy to do and doesn’t take a lot of time at all.

Start by tapping on the menu button in the bottom-left corner of the screen on the Ecobee thermostat.

Scroll down and tap on “Settings”.

Select “Access Control”.

Tap on “Enable Security Code”.

Enter in a four-digit passcode that you want to use with the thermostat in order to unlock it.

Once you enter that in, tap “Save” in the bottom-right corner of the screen.

Next, select all of the features that will require a passcode in order to change them. You can simply tap on “All” in order to lock down the thermostat entirely.

After you’re done with that, tap on the back arrow in the top-left corner to go back to the main screen.

At this point, the passcode will be enabled, but you’ll have to wait for the thermostat to go into standby mode before it will begin activating. You’ll know when it’s in standby mode when all that shows on the screen is the indoor temperature and a smaller icon below that denoting the outdoor temperature.

Now, whenever someone tries to change settings or adjust the indoor temperature, they will be met with a screen where they will need to enter in the passcode before they can change anything.